INCH-POUND
MIL-DTL-8878L
27 March 2014
SUPERSEDING
MIL-DTL-8878K
w/AMENDMENT 1
17 February 2009
DETAIL SPECIFICATION
TURNBUCKLES, POSITIVE SAFETYING,
GENERAL SPECIFICATION FOR
This specification is approved for use by all Departments and Agencies of the
Department of Defense.
1. SCOPE
1.1 Scope. This specification covers positive safetying turnbuckle component parts.
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this
specification. This section does not include documents cited in other sections of this specification
or recommended for additional information or as examples. While every effort has been made to
ensure the completeness of this list, document users are cautioned that they must meet all
specified requirements of the documents cited in sections 3 and 4 of this specification, whether or
not they are listed.
2.2 Government documents.
2.2.1 Specifications and standards. The following specifications and standards form a
part of this document to the extent specified herein. Unless otherwise specified, the issues of
these documents are those cited in the solicitation or contract.
Comments, suggestions, or questions on this document should be addressed to DLA Aviation,
VEB, 8000 Jefferson Davis Highway, Richmond, VA 23297-5616 or e-mailed to
STDZNMGT@dla.mil. Since contact information can change, you may want to verify the
currency of this address information using the ASSIST database at https://assist.dla.mil.
AMSC N/A
FSC 1640
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business