MS20658J
-
Dash
TABLE I. Dash numbers and dimensions.
II To achieve the minimum breaking strength. for the terminal test only, a galvanized carbon steel wire rope shall be used.
TABLE I. Dash numbers and dimensions - Continued.
Dash number |
1 +0.020 |
1s reference |
0M +0.010 |
ON +0.005 |
T +0.000 |
u reference |
w reference |
x Minimum |
z |
-0.000 |
-0.000 |
-0.000 |
-0.005 |
||||||
-3 |
2.531 |
2.65 |
0.119 |
0.109 |
0.190 |
0.750 |
O.Q31 |
0.80 |
1.344 |
-4 |
3.062 |
3.32 |
0.154 |
0.141 |
0.219 |
1.05 |
|||
-5 |
3.313 |
3.66 |
0.188 |
0.172 |
0.250 |
0.875 |
0.047 |
1.29 |
I .625 |
-6 3.562 3.73
-7 3.687 3.86 0223 0.203 0.313 1.000 1.31 1.750
REQUIREMENTS:
I. Material: Material shall be in accordance with MIL-DTL-781.
2. Finish: Finish shall be in accordance with MIL-DTL-781.
3. Swage: Swage shall be in accordance with MIL-DTL-6117.
4. Tolerances: Unless otherwise specified, tolerances: decimals± 0.010, angles± 3°. NOTES:
1. The part or identifying number (PIN) consists of the letters MS, the specification sheet number, and a dash number taken from table 1.
EXAMPLE: MS 20658 - 5
L Dash number
Specification sheet number
MS prefix
2. Dimensions are in inches.
3. Interpret drawing in accordance with ASME Y14.5M.
4. Remove burrs and sharp edges. (Sec MIL-DTL-781.)
2
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business