MS21260N
TABLE I. Dash numbers and dimensions - Continued.
Dash number |
0U reference |
0V ±0.005 |
w ±0.016 |
x |
y ±0.047 2/ |
z |
0BB |
Minimum |
Minimum |
||||||
L2 |
0.094 |
0.063 |
1.174 |
0.70 |
0.375 |
0.03 |
0.008 (0.016 FIM) |
S2 |
|||||||
L3 |
1.411 |
0.80 |
0.500 |
||||
S3 |
|||||||
L4 |
0.125 |
0.098 |
1.682 |
1.05 |
0.563 |
||
S4 |
|||||||
L5 |
1.958 |
1.29 |
0.625 |
||||
S5 |
|||||||
L6 |
2.237 |
1.31 |
0.750 |
||||
S6 |
|||||||
-7 |
2.518 |
1.55 |
0.875 |
||||
-8 |
2.784 |
1.70 |
|||||
-9 |
3.076 |
1.89 |
1.000 |
||||
-10 |
3.326 |
2.06 |
|||||
-12 |
3.828 |
3.12 |
1.125 |
0.010 (0.020 FIM) |
|||
-14 |
4.375 |
3.57 |
1.250 |
||||
-16 |
0.188 |
0.125 |
5.093 |
4.31 |
|||
-18 |
5.468 |
4.51 |
1.500 |
||||
-20 |
6.093 |
5.04 |
1.750 |
0.015 (0.030 FIM) |
|||
-24 |
7.188 |
5.80 |
2.000 |
||||
-28 |
7.846 |
6.31 |
0.020 (0.040 FIM) |
||||
-32 |
9.000 |
7.26 |
2.250 |
2/ Includes last full thread engagement.
REQUIREMENTS:
1. Material: Material shall be in accordance with MIL-DTL-781
2. Finish: Finish shall be in accordance with MIL-DTL-781.
3. Threads: Threads shall be in accordance with FED-STD-H28/20.
4. Swage: Swage shall be in accordance with MIL-DTL-6117.
5. Tolerances: Unless otherwise specified, tolerances: decimals ±0.010, angles ±3°. NOTES:
1. The part or identifying number (PIN) to be used for terminals acquired to this specification is created as shown below. An "L" in lieu of dash indicates long; an "S" in lieu of a dash indicates short. The two letters following the dash number or letters "L" or "R" indicates direction of thread (left or right hand).
4
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business